1. Press it to open, one button to lock, stable clamping without noise;
2. One-hand operation, easy to pick and place, convenient and fast;
3.360°rotation, universal view angle, free to adjustable for landscape and portrait mode;
4. Applicable to 4.7-6.5-inch phones, wide compatibility.
Material: ABS + silicone
Applicable Size: 60mm≤width≤ 87mm
(min: 60mm, max: 87mm)
Installation steps(Air outlet)
Step1: Connecting it to the holder by putting the ball joint into the nut and tightening it into the bolt of the holder
Step 2: Tighten the nut clockwise.
Step 3: Press the air vent clip button, insert it into the car air vent, and release the button to tighten it.
Step 4: Press the two buttons below the clamping arm to open the clamping arm, put the phone into the holder, and then press the phone screen to lock it tightly.
Step1: Put the ball joint into the nut and tighten it into the bolt of the holder.
Step 2: Fix the base of the suction cup holder at the appropriate position and press the vacuum switch.
Step 3: Turn the knob on the front of the support arm clockwise to adjust the height of the support rod.
Step 4: Turn the knob below the support arm forward to adjust it to180 degrees.
Step 5: Press the two buttons below the clamping arm to open the clamping arm, put the phone into the holder, and then press the phone screen to lock it tightly.